SKU: 55861518590
Ships within 48 hours · Estimated delivery Oct 6 - Oct 11
Hurtig hærdningstid
13-0859 TPG
Nozzle Temperature 220-250°C Bed Temperature 90°C Closed chamber not required Fan 0-25% Flowrate 95-105% Printing Speed < 100 mm/s Surface masking tape Retraction (direct) 2-3 mm Retraction (bowden) 3-5 mm Retraction Speed 20-45 mm/s Drying conditions 60°C / 4h Notes Due to the strong adhesion to the bed
* 2 x Socket Wrench - 6 and 8mm
Bambu Lab - Cooling Fan/Blæser - X1C ANYCUBIC PHOTON MONO SE - Reservedele Hurtig hærdningstidCooling Fan for Hotend from Bambu Lab for X1C The cooling fan for the Hotend is used to cool and reduce the temperature of the ceramic heater. The cooling fan for the hotend has an auto off function while locked at the rated voltage for 1 3 seconds. The circuit tries to restart after 2 to 6 seconds. There is no damage after 72 hours of locking. The cooling fan is a high speed rotating part, so do not touch it while it is running. Remember to check
US$ 99.95
US$ 49.95
US$ 49.95
US$ 49.95
US$ 59.95
